您的位置:标准吧 > 标准下载 > NR542 FLNG_SI

NR542 FLNG_SI

时间:2021-11-17 11:56:57 作者:qingyezs 来源:NR 阅读:591次
NR542 FLNG_SI
ARTICLE 1
1.1. - BUREAU VERITAS is a Society the purpose of whose Marine Division (the "Society") is the classification (" Classification ") of any ship or vessel or structure of any type or part of it or system therein collectively hereinafter referred to as a "Unit" whether linked to shore, river bed or sea bed or not, whether
operated or located at sea or in inland waters or partly on land, including submarines, hovercrafts, drilling
rigs, offshore installations of any type and of any purpose, their related and ancillary equipment, subsea
or not, such as well head and pipelines, mooring legs and mooring points or otherwise as decided by the
Society.
The Society:
• prepares and publishes Rules for classification, Guidance Notes and other documents (“Rules”);
• issues Certificates, Attestations and Reports following its interventions (“Certificates”);
• publishes Registers.
1.2. - The Society also participates in the application of National and International Regulations or Standards, in particular by delegation from different Governments. Those activities are hereafter collectively referred to as " Certification ".
1.3. - The Society can also provide services related to Classification and Certification such as ship and
company safety management certification; ship and port security certification, training activities; all activities and duties incidental thereto such as documentation on any supporting means, software, instrumentation, measurements, tests and trials on board.
1.4. - The interventions mentioned in 1.1., 1.2. and 1.3. are referred to as " Services ". The party and/or its
representative requesting the services is hereinafter referred to as the " Client ". The Services are prepared and carried out on the assumption that the Clients are aware of the International Maritime
and/or Offshore Industry (the "Industry") practices.
1.5. - The Society is neither and may not be considered as an Underwriter, Broker in ship's sale or chartering, Expert in Unit's valuation, Consulting Engineer, Controller, Naval Architect, Manufacturer, Shipbuilder, Repair yard, Charterer or Shipowner who are not relieved of any of their expressed or implied
obligations by the interventions of the Society.
ARTICLE 2
2.1. - Classification is the appraisement given by the Society for its Client, at a certain date, following surveys by its Surveyors along the lines specified in Articles 3 and 4 hereafter on the level of compliance of
a Unit to its Rules or part of them. This appraisement is represented by a class entered on the Certificates
and periodically transcribed in the Society's Register.
2.2. - Certification is carried out by the Society along the same lines as set out in Articles 3 and 4 hereafter
and with reference to the applicable National and International Regulations or Standards.
2.3. - It is incumbent upon the Client to maintain the condition of the Unit after surveys, to present
the Unit for surveys and to inform the Society without delay of circumstances which may affect the
given appraisement or cause to modify its scope.
2.4. - The Client is to give to the Society all access and information necessary for the safe and efficient
performance of the requested Services. The Client is the sole responsible for the conditions of presentation of the Unit for tests, trials and surveys and the conditions under which tests and trials are carried out.
ARTICLE 3
3.1. - The Rules, procedures and instructions of the Society take into account at the date of their
preparation the state of currently available and proven technical knowledge of the Industry. They
are not a standard or a code of construction neither a guide for maintenance, a safety handbook
or a guide of professional practices, all of which are assumed to be known in detail and carefully
followed at all times by the Client.
Committees consisting of personalities from the Industry contribute to the development of those documents.
3.2. - The Society only is qualified to apply its Rules and to interpret them. Any reference to them
has no effect unless it involves the Society's intervention.
3.3. - The Services of the Society are carried out by professional Surveyors according to the applicable
Rules and to the Code of Ethics of the Society. Surveyors have authority to decide locally on matters related to classification and certification of the Units, unless the Rules provide otherwise.
3.4. - The operations of the Society in providing its Services are exclusively conducted by way of
random inspections and do not in any circumstances involve monitoring or exhaustive verification.
ARTICLE 4
4.1. - The Society, acting by reference to its Rules:
• reviews the construction arrangements of the Units as shown on the documents presented by the Client;
• conducts surveys at the place of their construction;
• classes Units and enters their class in its Register;
• surveys periodically the Units in service to note that the requirements for the maintenance of class are
met.
The Client is to inform the Society without delay of circumstances which may cause the date or the
extent of the surveys to be changed.
ARTICLE 5
5.1. - The Society acts as a provider of services. This cannot be construed as an obligation bearing
on the Society to obtain a result or as a warranty.
5.2. - The certificates issued by the Society pursuant to 5.1. here above are a statement on the level
of compliance of the Unit to its Rules or to the documents of reference for the Services provided
for.
In particular, the Society does not engage in any work relating to the design, building, production
or repair checks, neither in the operation of the Units or in their trade, neither in any advisory services, and cannot be held liable on those accounts. Its certificates cannot be construed as an implied or express warranty of safety, fitness for the purpose, seaworthiness of the Unit or of its value
for sale, insurance or chartering.
5.3. - The Society does not declare the acceptance or commissioning of a Unit, nor of its construction in conformity wit
591
国家标准下载

下载说明:
1.请先分享,再下载
2.直接单击下载地址,不要使用“目标另存为”
3.压缩文件请先解压
4.PDF文件,请用PDF专用软件打开查看
5.如果资料不能下载,请联系本站
相关国家标准
最新评论
发表评论
大名:
联络: QQ 或者 邮箱
内容:不能超过250字,需审核,请自觉遵守互联网相关政策法规。

验证码: 5678