您的位置:标准吧 > 标准下载 > GB 50177 - 2005 氢气站设计规范

GB 50177 - 2005 氢气站设计规范

时间:2017-11-24 16:20:47 作者:380446113 来源:GB 阅读:993次
GB 50177 - 2005 氢气站设计规范
目 次
1 总 则 ·........................................................ ( 1 )
2 术 语 ·........................................................ ( 2 )
3 总平面布置 ···············································…… (5)
4 工艺系统 ···················································…… (8)
5 设备选择 ·················································…… (I1)
6 工艺布置 ···················································…… (14)
7 建筑结构 ···································,····,··········…… (17)
S 电气及仪表控制 ··········································,··… (1s)
9 防雷及接地 ··························,····················…… (22)
10 给水排水及消防 ····································,····…… (24)
I1 采暖通风 ···················································…… (25)
12 氢气管道 ······,··········································…… (26)
附录A 氢气站爆炸危险区域的等级范围划分 ·······…… (30)
附录 B 厂区、氢气站及车间架空氢气管道与其他架空
 管线之间的最小净距 ······························…… (32)
附录C 厂区架空氢气管道与建筑物、构筑物之间的
 最小净距 ·············································…… (33)
附录 D 厂区直接埋地氢气管道与其他埋地管线之间的
 最小净距 ·············································…… (34)
附录 E 厂区直接埋地氢气管道与建筑物、构筑物之间的
 最小净距 ············································…… (35)
本规范用词说明 ···············································… … (36)
附 :条文说明 ·················································…… (37)
1 总 则
1.0.1 为在氢气站、供氢站的设计中正确贯彻国家基本建设的方针政策,确保安全生产,节约能源,保护环境,满足生产要求,做到技术先进,经济合理,制定本规范1.0.2 本规范适用于新建、改建、扩建的氢气站、供氢站及厂区和车间的氢气管道设计。
1.0.3 氢气站、供氢站的生产火灾危险性类别,应为“甲”类。 氢气站、供氢站内有爆炸危险房间或区域的爆炸危险等级应划分为1区或2区,并应符合本规范附录 A的规定。
1.0.4 氢气站、供氢站和氢气管道的设计,除执行本规范外,尚应符合 国家现行有关标准 的规定
993
国家标准下载

下载说明:
1.请先分享,再下载
2.直接单击下载地址,不要使用“目标另存为”
3.压缩文件请先解压
4.PDF文件,请用PDF专用软件打开查看
5.如果资料不能下载,请联系本站
最新评论
发表评论
大名:
联络: QQ 或者 邮箱
内容:不能超过250字,需审核,请自觉遵守互联网相关政策法规。

验证码: 3076