INCITS TR-35-2004 INCITS Technical Report

to zero 14 F 1b Shall be set to one 13 F 1b 1 = IDLE IMMEDIATE with UNLOAD FEATURE supported 12 F 0b Reserved for technical report INCITS TR-37-2004 (TLC) 11 F 0b
31 -A Differential signal pair +A and -A 32 TWI 33 +A 34 GND Ground 35 GND Ground 36
F 0b Shall be cleared to zero 14 F 1b Shall be set to one 13 F 1b 1 = Idle immediate with unload feature is supported 12 F 0b Reserved for technical report INCITS TR-37-2004 (TLC)
128KB write: 375 MB/s – Random 4KB read: 63，000 IOPS – Random 4KB write: 35，000
to zero 14 F 1b Shall be set to one 13 F 1b 1 = IDLE IMMEDIATE with UNLOAD FEATURE supported 12 F 0b Reserved for technical report INCITS TR-37-2004 (TLC) 11 F 0b
31 -A Differential signal pair +A and -A 32 TWI 33 +A 34 GND Ground 35 GND Ground 36
84 15 F 0b Shall be cleared to 0 14 F 1b Shall be set to 1 13 F 1b 1 = IDLE IMMEDIATE with UNLOAD FEATURE support 12 F X Reserved for technical report INCITS TR-37-2004 (
(HDD test suite score): 45，000 [40，000 for 64GB] (SATA 6 Gb/s); 35，000 [32，000 for 64GB
Shall be cleared to zero 14 Shall be set to one 13 1 = IDLE IMMEDIATE with UNLOAD FEATURE supported 12 Reserved for Technical Report INCITS TR-37-2004 (TLC) 11 Reserved
(94h or E0h)28 Write Buffer (E8h)28 Write DMA (CAh)28 Write DMA Ext (35h)28 Write
( FCSM) 90页ANSI INCITS TR 34-2003 INCITS 信息技术的技术报告 地理特征的目录方法论：通用规范大纲 20页ANSI INCITS TR 35-2004 INCITS Technical Report for Information
set supported F 9 1 = Automatic Acoustic Management feature set supported F 8 1 = SET MAX security extension supported 7 Reserved for Technical Report， INCITS TR27-2001 F 6
-40o C to +85o C Burst Transfer Rate 100MB/sec Sustained Read Throughput 35MB/sec

Abstract
This technical report enhances the jitter and signal specifications found in the Fibre Channel Physical
layer standards and in the technical report Methodologies for Jitter Specification (MJS). It provides
extended definitions and test methodologies to enable more effective execution of specifications relating
to the phase timing features of high speed serial signals. A generalization of jitter concepts to include
events that occur at other than the nominal receiver detection threshold provides a stronger coupling
between the jitter measured in a signal and the errors produced by the receiver of the signal. The methodologies described use a structured approach to describe the tests that recognize the contributions from
test fixtures, instrumentation and calibration schemes to the reported values. Although this report uses
1.0625 GBd for some examples it is intended to be fully applicable to speeds well in excess of the existing 4.25 GBd jitter specifications in FC-PI-n.Published by
American National Standards Institute
25 West 43rd Street, New York, New York 10036
Copyright  2004 by Information Technology Industry Council (ITI)
All rights reserved.
No part of this publication may be reproduced in any
form, in an electronic retrieval system or otherwise,
without prior written permission of the publisher.
Printed in the United States of America
INCITS’
Technical
Report
Series
This Technical Report is one i1943