AWS A5.20/A5.20M:2005 碳钢焊丝规范

阿里巴巴现货包邮 AWS A5.20/A5.20M-2005中文版 弧焊用碳钢药芯焊丝标准，书籍，这里云集了众多的供应商，采购商，制造商。这是现货包邮 AWS A5.20/A5.20M-2005中文版
埋弧焊用碳钢焊丝和焊剂19 AWS A5.18/A5.18M:2005气体保护焊用碳钢焊丝和填充丝20
镁合金焊丝21 AWS A5.20/A5.20M:2005弧焊用碳钢药芯焊丝22 AWS A5.21:2001堆焊用
埋弧焊碳钢焊丝及焊剂 A5.18 气保护电弧焊碳钢填充金属 A5.20 碳纲药芯电弧焊焊丝 A5
. 填充金属的种类和规格变化，或者填充金属的型号没有变化（同一种AWS规范），但生
管道及相关设施焊接标准 美国石油协会标准 1104 第20版2005年11月API（美国石油协会

AWS A5.20/A5.20M:2005碳钢焊丝规范AwsA5.20

Statement on Use of AWS American National Standards
All standards (codes, specifications, recommended practices, methods, classifications, and guides) of the American
Welding Society (AWS) are voluntary consensus standards that have been developed in accordance with the rules of the
American National Standards Institute (ANSI). When AWS standards are either incorporated in, or made part of,
documents that are included in federal or state laws and regulations, or the regulations of other governmental bodies,
their provisions carry the full legal authority of the statute. In such cases, any changes in those AWS standards must be
approved by the governmental body having statutory jurisdiction before they can become a part of those laws and
regulations. In all cases, these standards carry the full legal authority of the contract or other document that invokes the
AWS standards. Where this contractual relationship exists, changes in or deviations from requirements of an AWS
standard must be by agreement between the contracting parties.
International Standard Book Number: 0-87171-003-X
American Welding Society, 550 N.W. LeJeune Road, Miami, FL 33126
© 2005 by American Welding Society. All rights reserved
Printed in the United States of America
AWS American National Standards are developed through a consensus standards development process that brings
together volunteers representing varied viewpoints and interests to achieve consensus. While AWS administers the process
and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or
verify the accuracy of any information or the soundness of any judgments contained in its standards.
AWS disclaims liability for any injury to persons or to property, or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on this
standard. AWS also makes no guaranty or warranty as to the accuracy or completeness of any information published herein.
In issuing and making this standard available, AWS is not undertaking to render professional or other services for or on
behalf of any person or entity. Nor is AWS undertaking to perform any duty owed by any person or entity to someone
else. Anyone using these documents should rely on his or her own independent judgment or, as appropriate, seek the advice
of a competent professional in determining the exercise of reasonable care in any given circumstances.
This standard may be superseded by the issuance of new editions. Users should ensure that they have the latest edition.
Publication of this standard does not authorize infringement of any patent or trade name. Users of this standard accept
any and all liabilities for infringement of any patent or trade name items. AWS disclaims liability for the infringement of
any patent or product trade name resulting from the use of this standard.
Finally, AWS does not monitor, police, or enforce compliance with this standard, nor does it have the power to do so.
On occasion, text, tables, or figures are printed incorrectly, constituting errata. Such errata, when discovered, are posted
on the AWS web page (www.aws.org).
Official interpretations of any of the technical requirements of this standard may only be obtained by sending a request, in writing, to the Managing Director, Technical Services Division, American Welding Society, 550 N.W. LeJeune Road, Miami, FL
33126 (see Annex B). With regard to technical inquiries made concerning AWS standards, oral opinions on AWS standards
may be rendered. However, such opinions represent only the personal opinions of the particular individuals giving them. These
individuals do not speak on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations of AWS. In addition, oral opinions are informal and should not be used as a substitute for an official interpretation.
This standard is subject to revision at any time by the AWS A5 Committee on Filler Metals and Allied Materials. It must
be reviewed every five years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recommendations, additions, or deletions) and any pertinent data that may be of use in improving this standard are required
and should be addressed to AWS Headquarters. Such comments will receive careful consideration by the AWS A5
Committee on Filler Metals and Allied Materials and the author of the comments will be informed of the Committee’s
response to the comments. Guests are invited to attend all meetings of the AWS A5 Committee on Filler Metals and
Allied Materials to express their comments verbally. Procedures for appeal of an adverse decision concerning all such
comments are provided in the Rules of Operation of the Technical Activities Committee. A copy of these Rules can be
obtained from the American Welding Society, 550 N.W. LeJeune Road, Miami, FL 33126.
Photocopy Rights
Authorization to photocopy items for internal, personal, or educational classroom use only, or the internal, personal, or
educational classroom use only of specific clients, is granted by the American Welding Society (AWS) provided that the
appropriate fee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, Tel: 978-750-8400;
online: http://www.copyright.com.
Copyright American Welding Society
Provided by IHS under license with AWS
No reproduction or networking permitted without license from IHS Not for Resale
--`,,`,,,-`-`,,`,,`,`,,`---iii
Personnel
AWS A5 Committee on Filler Metals and Allied Materials
D. A. Fink, Chair The Lincoln Electric Company
J. S. Lee, 1st Vice Chair Chicago Bridge & Iron Company
H. D. Wehr, 2nd Vice Chair Arcos Industries LLC
R. K. Gupta, Secretary American Welding Society
*R. L. Bateman Electromanufacturas S A
J. M. Blackburn Naval Surface Warfare Center
**B. S. Blum Consultant
R. S. Brown Consultant
J. C. Bundy ITW Hobart Brothers
R. J. Christoffel Consultant
*G. Crisi Universidade Presbiteriana
D. D. Crockett The Lincoln Electric Company
*R. A. Daemen Consultant
D. A. DelSignore Consultant
J. DeVito ESAB Welding & Cutting Products
H. W. Ebert Consultant
D. M. Fedor The Lincoln Electric Company
J. G. Feldstein Foster Wheeler Energy Corporation
S. E. Ferree ESAB Welding & Cutting Products
***G. L. Franke Naval Surface Warfare Center
R. D. Fuchs Böhler Thyssen Welding USA, Incorporated
C. E. Fuerstenau Lucas-Milhaupt, Incorporated
J. A. Henning Consultant
*J. P. Hunt Consultant
M. Q. Johnson Los Alamos National Laboratory
S. D. Kiser Special Metals
P. J. Konkol Concurrent Technologies Corporation
D. J. Kotecki The Lincoln Electric Company
***L. G. Kvidahl Northrop Grumman Ship Systems
A. S. Laurenson Consultant
K. F. Longden Canadian Welding Bureau
W. A. Marttila Daimler-Chrysler Corporation
R. Menon Stoody Company
M. T. Merlo Select-Arc, Incorporated
D. R. Miller ABS Americas
*B. Mosier Polymet Corporation
C. L. Null NAVSEA
M. P. Parekh Consultant
*D. Park Consultant
R. L. Peaslee Wall Colmonoy Corporation
*M. A. Quintana The Lincoln Electric Company
S. D. Reynolds, Jr. Consulta